open-discussion
open-discussion > RE: DTIPrep command line installation
Jun 29, 2018 02:06 PM | Kelli Dominick - Cincinnati Children's Hospital Medical Center
RE: DTIPrep command line installation
Did anyone get a solution to
this?
Originally posted by XIAO YANG:
Originally posted by XIAO YANG:
Dear Experts and
DTIPrep users,
I am trying to do the build steps following:
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I had a similar problem. When I did run: cmake ../DTIPrep
CMake Error at /usr/local/Cellar/cmake/3.11.4/share/cmake/Modules/FindQt4.cmake:1321 (message):
Found unsuitable Qt version "5.6.2" from /anaconda3/bin/qmake, this code
requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
Aftet I installed qt4 /usr/local/Cellar/qt@4/4.8.7_5: 2,963 files, 86.1MB. it still didn't work.
Any help and suggestion would be appreciated.
Best,
Xiao
Originally posted by Anna Kautto:
I am trying to do the build steps following:
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I had a similar problem. When I did run: cmake ../DTIPrep
CMake Error at /usr/local/Cellar/cmake/3.11.4/share/cmake/Modules/FindQt4.cmake:1321 (message):
Found unsuitable Qt version "5.6.2" from /anaconda3/bin/qmake, this code
requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
Aftet I installed qt4 /usr/local/Cellar/qt@4/4.8.7_5: 2,963 files, 86.1MB. it still didn't work.
Any help and suggestion would be appreciated.
Best,
Xiao
Originally posted by Anna Kautto:
I also have a problem with Qt version. I have
5.6.2 and I get error "Found unsuitable Qt version "5.6.2" from
/anaconda3/bin/qmake, this code
requires Qt 4.x" Should I try installing older version of Qt? Did someone already solve this issue?
Anna
Originally posted by Amanda Szymanski:
requires Qt 4.x" Should I try installing older version of Qt? Did someone already solve this issue?
Anna
Originally posted by Amanda Szymanski:
I'm having a
similar issue as Cyril:
CMake Error at /usr/local/Cellar/cmake/3.9.2/share/cmake/Modules/FindQt4.cmake:1318 (message):
Found unsuitable Qt version "" from NOTFOUND, this code requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
I have Qt5 installed. I've tried installing Qt4 & directing ccmake to use that instead, but it still wouldn't work. Any suggestions?
Originally posted by Cyril Pernet:
CMake Error at /usr/local/Cellar/cmake/3.9.2/share/cmake/Modules/FindQt4.cmake:1318 (message):
Found unsuitable Qt version "" from NOTFOUND, this code requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
I have Qt5 installed. I've tried installing Qt4 & directing ccmake to use that instead, but it still wouldn't work. Any suggestions?
Originally posted by Cyril Pernet:
Dear Juan,
I followed the instructions below but I got an error message related to Qt
I followed the instructions below but I got an error message related to Qt
Did you execute the make command after
configuration?
The build steps should look something like this.
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
The build steps should look something like this.
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I'm running Ubuntu Xenial and have intalled Qt5
Qt4 following the instruction here
https://wiki.qt.io/Install_Qt_5_on_Ubuntu
error message seems to be that I need at least
qt4.6 ??
CMake Error at
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148
(message):
Could NOT find Qt4 (missing: QT_RCC_EXECUTABLE) (found suitable version
"4.8.7", minimum required is "4.6")
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388
(_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake-3.5/Modules/FindQt4.cmake:1333
(FIND_PACKAGE_HANDLE_STANDARD_ARGS)
Common.cmake:38 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:29 (include)
Any ideee how to make it work ??
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148
(message):
Could NOT find Qt4 (missing: QT_RCC_EXECUTABLE) (found suitable version
"4.8.7", minimum required is "4.6")
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388
(_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake-3.5/Modules/FindQt4.cmake:1333
(FIND_PACKAGE_HANDLE_STANDARD_ARGS)
Common.cmake:38 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:29 (include)
Any ideee how to make it work ??
thx
cyril
Threaded View
Title | Author | Date |
---|---|---|
Tanmay Nath | Sep 19, 2016 | |
Ryan H | Mar 13, 2018 | |
Juan Prieto | Mar 15, 2018 | |
Juan Prieto | Sep 19, 2016 | |
Martin Styner | Sep 19, 2016 | |
Tanmay Nath | Sep 19, 2016 | |
Juan Prieto | Sep 19, 2016 | |
Abhineet Ojha | Sep 3, 2018 | |
Juan Prieto | Sep 4, 2018 | |
Abhineet Ojha | Sep 5, 2018 | |
Juan Prieto | Sep 10, 2018 | |
Huan Yang | Mar 5, 2018 | |
Martin Styner | Mar 5, 2018 | |
Huan Yang | Mar 6, 2018 | |
Juan Prieto | Mar 6, 2018 | |
Cyril Pernet | Aug 8, 2017 | |
Amanda Szymanski | Sep 8, 2017 | |
Anna Kautto | Apr 22, 2018 | |
XIAO YANG | Jun 21, 2018 | |
Kelli Dominick | Jun 29, 2018 | |
Martin Styner | Jun 29, 2018 | |
Tanmay Nath | Sep 19, 2016 | |
Tanmay Nath | Sep 20, 2016 | |
Juan Prieto | Sep 20, 2016 | |
Tanmay Nath | Sep 20, 2016 | |