open-discussion
open-discussion > RE: DTIPrep command line installation
Jun 29, 2018 03:06 PM | Martin Styner
RE: DTIPrep command line installation
Juan Prieto would probably be more
appropriate to answer this, but here a bit of guidance
1. DTIPrep needs QT 4 (like you realized)
2. After you installed QT 4, and you rerun ccmake, does it find the correct version and sets the paths correctly for QT?
Did you start the configuration and compilation from scratch after the installation of QT4, or did you try to continue on the previous compilation that did not succeed with Qt5? If not, just try to compile from scratch.
Martin
Originally posted by Kelli Dominick:
1. DTIPrep needs QT 4 (like you realized)
2. After you installed QT 4, and you rerun ccmake, does it find the correct version and sets the paths correctly for QT?
Did you start the configuration and compilation from scratch after the installation of QT4, or did you try to continue on the previous compilation that did not succeed with Qt5? If not, just try to compile from scratch.
Martin
Originally posted by Kelli Dominick:
Did anyone get a
solution to this?
Originally posted by XIAO YANG:
Originally posted by XIAO YANG:
Dear Experts and
DTIPrep users,
I am trying to do the build steps following:
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I had a similar problem. When I did run: cmake ../DTIPrep
CMake Error at /usr/local/Cellar/cmake/3.11.4/share/cmake/Modules/FindQt4.cmake:1321 (message):
Found unsuitable Qt version "5.6.2" from /anaconda3/bin/qmake, this code
requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
Aftet I installed qt4 /usr/local/Cellar/qt@4/4.8.7_5: 2,963 files, 86.1MB. it still didn't work.
Any help and suggestion would be appreciated.
Best,
Xiao
Originally posted by Anna Kautto:
I am trying to do the build steps following:
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I had a similar problem. When I did run: cmake ../DTIPrep
CMake Error at /usr/local/Cellar/cmake/3.11.4/share/cmake/Modules/FindQt4.cmake:1321 (message):
Found unsuitable Qt version "5.6.2" from /anaconda3/bin/qmake, this code
requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
Aftet I installed qt4 /usr/local/Cellar/qt@4/4.8.7_5: 2,963 files, 86.1MB. it still didn't work.
Any help and suggestion would be appreciated.
Best,
Xiao
Originally posted by Anna Kautto:
I also have a problem with Qt version. I have
5.6.2 and I get error "Found unsuitable Qt version "5.6.2" from
/anaconda3/bin/qmake, this code
requires Qt 4.x" Should I try installing older version of Qt? Did someone already solve this issue?
Anna
Originally posted by Amanda Szymanski:
requires Qt 4.x" Should I try installing older version of Qt? Did someone already solve this issue?
Anna
Originally posted by Amanda Szymanski:
I'm having a
similar issue as Cyril:
CMake Error at /usr/local/Cellar/cmake/3.9.2/share/cmake/Modules/FindQt4.cmake:1318 (message):
Found unsuitable Qt version "" from NOTFOUND, this code requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
I have Qt5 installed. I've tried installing Qt4 & directing ccmake to use that instead, but it still wouldn't work. Any suggestions?
Originally posted by Cyril Pernet:
CMake Error at /usr/local/Cellar/cmake/3.9.2/share/cmake/Modules/FindQt4.cmake:1318 (message):
Found unsuitable Qt version "" from NOTFOUND, this code requires Qt 4.x
Call Stack (most recent call first):
Common.cmake:35 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:28 (include)
I have Qt5 installed. I've tried installing Qt4 & directing ccmake to use that instead, but it still wouldn't work. Any suggestions?
Originally posted by Cyril Pernet:
Dear Juan,
I followed the instructions below but I got an error message related to Qt
I followed the instructions below but I got an error message related to Qt
Did you execute the make command after
configuration?
The build steps should look something like this.
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
The build steps should look something like this.
1. git clone https://github.com/NIRALUser/DTIPrep.git
2. mkdir DTIPrep-build; cd DTIPrep-build
3. ccmake ../DTIPrep
4. make
I'm running Ubuntu Xenial and have intalled Qt5
Qt4 following the instruction here
https://wiki.qt.io/Install_Qt_5_on_Ubuntu
error message seems to be that I need at least
qt4.6 ??
CMake Error at
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148
(message):
Could NOT find Qt4 (missing: QT_RCC_EXECUTABLE) (found suitable version
"4.8.7", minimum required is "4.6")
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388
(_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake-3.5/Modules/FindQt4.cmake:1333
(FIND_PACKAGE_HANDLE_STANDARD_ARGS)
Common.cmake:38 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:29 (include)
Any ideee how to make it work ??
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148
(message):
Could NOT find Qt4 (missing: QT_RCC_EXECUTABLE) (found suitable version
"4.8.7", minimum required is "4.6")
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388
(_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake-3.5/Modules/FindQt4.cmake:1333
(FIND_PACKAGE_HANDLE_STANDARD_ARGS)
Common.cmake:38 (find_package)
SuperBuild.cmake:20 (include)
CMakeLists.txt:29 (include)
Any ideee how to make it work ??
thx
cyril
Threaded View
Title | Author | Date |
---|---|---|
Tanmay Nath | Sep 19, 2016 | |
Ryan H | Mar 13, 2018 | |
Juan Prieto | Mar 15, 2018 | |
Juan Prieto | Sep 19, 2016 | |
Martin Styner | Sep 19, 2016 | |
Tanmay Nath | Sep 19, 2016 | |
Juan Prieto | Sep 19, 2016 | |
Abhineet Ojha | Sep 3, 2018 | |
Juan Prieto | Sep 4, 2018 | |
Abhineet Ojha | Sep 5, 2018 | |
Juan Prieto | Sep 10, 2018 | |
Huan Yang | Mar 5, 2018 | |
Martin Styner | Mar 5, 2018 | |
Huan Yang | Mar 6, 2018 | |
Juan Prieto | Mar 6, 2018 | |
Cyril Pernet | Aug 8, 2017 | |
Amanda Szymanski | Sep 8, 2017 | |
Anna Kautto | Apr 22, 2018 | |
XIAO YANG | Jun 21, 2018 | |
Kelli Dominick | Jun 29, 2018 | |
Martin Styner | Jun 29, 2018 | |
Tanmay Nath | Sep 19, 2016 | |
Tanmay Nath | Sep 20, 2016 | |
Juan Prieto | Sep 20, 2016 | |
Tanmay Nath | Sep 20, 2016 | |