help
help > RE: Missing parallelization option?
Jan 10, 2019 05:01 PM | Alfonso Nieto-Castanon - Boston University
RE: Missing parallelization option?
Hi,
Could you please double-check if the PBS/Torque option is marked as the default parallelization profile (i.e. if the 'Default profile' checkbox is checked for this profile in the HPC configuration menu)?
also, if this option is not checked and simply checking it solves this issue, could you please still let me know just for debugging purposes if you recall how you originally saved your HPC configuration settings (saved for all users or only current user?, using standalone or Matlab version? that will help me debug this so other users do not run into the same problem)
Best
Alfonso
Originally posted by Wilson Ho:
Could you please double-check if the PBS/Torque option is marked as the default parallelization profile (i.e. if the 'Default profile' checkbox is checked for this profile in the HPC configuration menu)?
also, if this option is not checked and simply checking it solves this issue, could you please still let me know just for debugging purposes if you recall how you originally saved your HPC configuration settings (saved for all users or only current user?, using standalone or Matlab version? that will help me debug this so other users do not run into the same problem)
Best
Alfonso
Originally posted by Wilson Ho:
Hello Alfonso and CONN experts,
I recently switched from the 17.f standalone to the 18.b standalone and I've noticed some great improvements, especially in the interface speed, so thank you for all the work you have put into this!
I have a question with the HPC setup with 18.b. Back in 17.f I had a setup (with PBS/Torque) that worked both in the configuration tests, and for processing steps. In 18.b I noticed that while the PBS/Torque option still shows in the configuration menu (Tools>HPC Options>Configuration) and can be tested successfully, it no longer appears as an option in the dropdown for processing steps (see screenshot). Since no one else has mentioned this I presume it is a glitch with my specific installation. Do you know if there is a way to restore this option? Parallelization has been a life-saver for the dozens of subjects I've had to process, and it would be great to have it back.
Thanks!
I recently switched from the 17.f standalone to the 18.b standalone and I've noticed some great improvements, especially in the interface speed, so thank you for all the work you have put into this!
I have a question with the HPC setup with 18.b. Back in 17.f I had a setup (with PBS/Torque) that worked both in the configuration tests, and for processing steps. In 18.b I noticed that while the PBS/Torque option still shows in the configuration menu (Tools>HPC Options>Configuration) and can be tested successfully, it no longer appears as an option in the dropdown for processing steps (see screenshot). Since no one else has mentioned this I presume it is a glitch with my specific installation. Do you know if there is a way to restore this option? Parallelization has been a life-saver for the dozens of subjects I've had to process, and it would be great to have it back.
Thanks!
Threaded View
| Title | Author | Date |
|---|---|---|
| Wilson Ho | Jan 10, 2019 | |
| Alfonso Nieto-Castanon | Jan 10, 2019 | |
| Wilson Ho | Jan 10, 2019 | |
| Alfonso Nieto-Castanon | Jan 10, 2019 | |