open-discussion
open-discussion > RE: Case Study Questions
Jun 17, 2019 09:06 PM | Mohsen Bahrami
RE: Case Study Questions
Hi,
The results are located under the "Case_Study" folder on: "/Case_Study/Statistical_Model/Results".
The results from both SAS and R runs are provided in this folder (you can use either one of them depending on your software availability).
To successfully load the data files, you should notice that you must use MATLAB on a Linux OS and preferably a version of 2016b or above at this time. However, the modeling software (i.e., SAS or R) could be on a Windows OS as well. We have pointed out this in the manual. (We will be releasing an update very soon that can be used
with Matlab installed on Windows.) Also, you should choose "Connectivity Matrices" for the data type in the "Network_Model" GUI before loading the data files. You can see an example of a file list in the use manual (page 11 figure 6). An example file list for loading the data files of the case study is provided below:
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub01/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub02/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub03/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub04/FullyWtd_Aij_250_2.mat
...
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub15/FullyWtd_Aij_250_2.mat
Let us know if you had any further questions.
Apologies for the delayed response. I didn't get the email!
Peace,
Mohsen
The results are located under the "Case_Study" folder on: "/Case_Study/Statistical_Model/Results".
The results from both SAS and R runs are provided in this folder (you can use either one of them depending on your software availability).
To successfully load the data files, you should notice that you must use MATLAB on a Linux OS and preferably a version of 2016b or above at this time. However, the modeling software (i.e., SAS or R) could be on a Windows OS as well. We have pointed out this in the manual. (We will be releasing an update very soon that can be used
with Matlab installed on Windows.) Also, you should choose "Connectivity Matrices" for the data type in the "Network_Model" GUI before loading the data files. You can see an example of a file list in the use manual (page 11 figure 6). An example file list for loading the data files of the case study is provided below:
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub01/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub02/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub03/FullyWtd_Aij_250_2.mat
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub04/FullyWtd_Aij_250_2.mat
...
.../Case_Study/Data/Imaging_Connectivty_Matrices/Sub15/FullyWtd_Aij_250_2.mat
Let us know if you had any further questions.
Apologies for the delayed response. I didn't get the email!
Peace,
Mohsen
Threaded View
Title | Author | Date |
---|---|---|
Mohsen Bahrami | Aug 22, 2018 | |
David Francis | Apr 25, 2019 | |
Mohsen Bahrami | Jun 17, 2019 | |